【教學】口袋型路由器 TL-WR702N 分享器Router設定

開箱介紹請至此

連接至TL-WR702N

可以使用無線或有線連線TL-WR702N（Wi-Fi的金鑰在TL-WR702N背面）。
可使用手機或電腦

登入管理介面

在瀏覽器上輸入網址tplinkwifi.net

預設為：

• 帳號：admin

• 密碼：admin

點選[快速設定]>下一頁

Working Mode help
This page is for setting working mode.

AP - The wireless access point mode. On the mode, the only wired port works as LAN. Computer could connect to the device by either wired or wireless way. To avoid the conflict of DHCP service with front-end devices, the DHCP server is default to be closed on this mode. If you want to login the management page, please set your computer's IP address manually.
Router - The wireless Router Mode. On the mode, the only wired port works as WAN. Computers could connect to the device by only wireless way. DHCP server is default opened, so it suggests that you could set your computer to get IP address and DNS address automatically.
Repeater - The Repeater Mode. On the mode, the only wired port works as LAN. Computer could connect to the device by either wired or wireless way. The SSID should be the device that you repeat to. To avoid the conflict of DHCP service with front-end device, the DHCP server is default to be closed on this mode. If you want to login the management page, please set your computer's IP address manually.
Bridge - The Bridge Mode. On the mode, the only wired port works as LAN. Computer could connect to the device by either wired or wireless way. To avoid the conflict of DHCP service with front-end devices, the DHCP server is default to be closed on this mode. If you want to login the management page, please set your computer's IP address manually.
Client - The Client Mode. On the mode, the only wired port works as LAN. Computer could connect to the device by either wired or wireless way. To avoid the conflict of DHCP service with front-end devices, the DHCP server is default to be closed on this mode. If you want to login the management page, please set your computer's IP address manually.

• AP模式為Access Point，將TL-WR702N變成一個Wi-fi發射器，但不可連線至網際網路，但大部分都是用此模式進行設定。
• Router模式為分享模式，透過網路線與網際網路溝通上網
• Repeater模式為加強無線訊號，但本人覺得不怎麼好用
• Cilent模式可將TL-WR702N變成無線網卡，讓沒有Wi-fi的桌機可以連上Wi-fi

Router模式設定

SSID：Wi-fi名稱
Region：各國的無線功率標準均不一，請選擇使用此AP的區域
Channel：無線通訊有很多頻道，為了防止無線訊號互相干擾，通常會自動將頻道錯開

如果需要設定Wi-fi密碼，請在安全性設為WPA-PSK/WPA2-PSK

PPPoE：將TL-WR702N直接透過線接至數據機，需要ISP提供上網的帳號。
動態ip：比較常見的連線方式，隨插即用，不需要上網的帳號。
靜態ip：通常用於社區網路或公司網路，需要手動定義ip。

問題Q&A

Q:

開啟分享模式時 ，用網路線連接TL-WR702N ，無法進入管理介面。

A:

分享器模式等於使用網路線端做網際網路連接通道。

請使用含有無線介面的裝置，如手機，連接至TL-WR702N，並開啟瀏覽器輸入tplinkwifi.net。

或者

用尖銳物品按壓TL-WR702N後面的RESET鍵至TL-WR702N閃燈

Q:
忘記密碼

A:
用尖銳物品按壓TL-WR702N後面的RESET鍵至TL-WR702N閃燈，回復原廠設定